Choose your location:
Pride Rapid Stable at 1 ohm load. Power 1800 W for a load of 1 Ohm, at a voltage of 14.8 volts and K.N.I. ~ 5%, which is the norm for the subwoofer link.
The remote control of the input sensitivity level has an LED indicator for exceeding the threshold of permissible distortions.
Possible to work in the mode of “bridge inclusion”
Pride Rapid Can work in both bridge mode and array mode (link).
Without fear, it is possible to connect to a load with a resistance of 0.5 Ohms if it is a subwoofer speaker whose DC resistance of the voice coils is not lower than the indicated mark.
Range of reproduced frequencies, Hz 15 – 270
RMS rated power in 1 Ohm, number of channels x W 1 x 1800
RMS rated power of 2 ohms, number of channels x W 1 x 1100
RMS rated power of 4 ohms, number of channels x W 1 x 650
Developed and designed on the basis of Korean Circuitry with the completion of Russian engineers.
Excellent solution for powerful subwoofers and high-quality sound for many years of work.
|1 Ohm Power||1800 W|
|2 Ohm Power||1100 W|
|4 Ohm Power||650 W|
|Frequency Response||15Hz - 270 Hz|
|Signal to Noise||85 dB|
|Efficiency @ 4ohm||Over 90%|
|Damping Factor||> 200|
|Subsonic Filter||10 Hz - 50 Hz|
|Bass Boost||0-9 dB|
|Remote Control with indication of exceeding the distortion||Included|
|Low Pass Filter||35 Hz - 250 Hz|
|Fuse Rating||150 A|